FlightLinx® Bend Optimized Single-mode

This item is not available for purchased online. To purchase this item, or for more information, please contact Customer Service.

Item Number
C24895

Description
FlightLinx® Bend Optimized Single-mode

Attenuation	@ 1310 / 1550 nm, ≤ 1.0 / 0.70 (dB/km)
Buffer Material	Black PFA
Operating Temperature	-55 to +200 (ºC)
Typical Applications	Display systems In-flight entertainment systems In-flight networking systems
Cladding Diameter	125 ± 1 (µm)
Coating Diameter	400 ± 25 (µm)
Buffer Diameter	900 ± 50 (µm)
Coating Material	Silicone
Jacket Material	PFA
Note	The operating temperature ranges are general guidelines. Consult with our Technical Sales department to determine the optimal coating and jacketing material for your specific application. 1.860.678.6636.OFS reserves the right to make changes to the prices and product(s) described in this document at any time without notice.This document is for informational purposes only and is not intended to modify or supplement any OFS warranties or specifications relating to any of its products or services.
Outer Cable Diameter	1.8 ± 0.1 (mm)
Cable Weight	≤ 4.0 (kg/km)
Outer Jacket Color	Light Purple
Installation Load Maximum	86 (N)
Installation Load Maximum	19.3 (lb)
Minimum Bend Installation	25 (mm)
Minimum Bend Operating	8 (mm)
Storage Temperature	-55 to 85 (ºC)
Operating Wavelength	13101550 (nm)
Fiber Cutoff Wavelength	1260 ± 50 (nm)
Cable Construction	Tight-buffered Simplex with braided strength member
Macrobend Performance	@ 1550 nm; 1 turn on 10 mm bend radius mandrel ≤ 0.2 dB
Flammability: FAR 25.869	Extinguish time: 0 seconds; Max. burn length: < 1.5 inches
Smoke Density	Ds @ 20 minutes; < 23.5