G.652.D, SM, ZWP, 9.2 MFD

This item is not available for purchased online. To purchase this item, or for more information, please contact Customer Service.

Item #AllWave® ZWP SM Fiber

Description
Specifications
Spec Table (Test)
Dimensions
Description 1
Description 2
Downloads

Item Number
AllWave® ZWP SM Fiber

Description
G.652.D, SM, ZWP, 9.2 MFD

Applications
Campus Backbones,FTTx,Local Access,Long Haul,Metro Access,Metro Edge,Mobile backhaul

Clad Non-Circularity

≤ 0.7 (%)

Clad Diameter

125.0 ± 0.7 (µm)

Single-Mode or Multimode

Single-Mode

Performance Characteristic

G.652.D

Bend Performance

Full Spectrum

Core/Clad Concentricity Error (Offset)

≤ 0.5 µm, < 0.2 µm typically

Tensile Proof Test

100 (kpsi)

Tensile Proof Test

0.69 (GPa)

Zero Chromatic Dispersion Wavelength (λ₀)

1302 – 1322 nm (nm)

Zero Chromatic Dispersion Slope (S₀)

≤ 0.090 (ps/(nm²·km))

Dynamic Fatigue Stress Corrosion Parameter (n_d)

(n_d) > 20

Coating-Clad Concentricity Error (Offset)

≤ 12 (µm)

Coating Diameter (Uncolored)

237 - 247 (µm)

Attenuation Uniformity/Point Discontinuities at 1310 and 1550 nm

< 0.05 (dB)

Group Refractive Index at 1310 nm

1.467

Group Refractive Index at 1550 nm

1.468

Mode Field Diameter at 1310 nm

9.2 ± 0.4 (µm)

Mode Field Diameter at 1550

10.4 ± 0.5 (µm)

Cable Cutoff Wavelength (λ_CC)

≤ 1260 (nm)

Fiber Polarization Mode Dispersion (PMD) Link Design Value (LDV)

< 0.06 (ps/√km)

Maximum Individual Fiber - Polarization Mode Dispersion (PMD)

< 0.1 (ps/√km)

Temperature Cycling (-60 to +85 ºC)

≤ 0.05 (dB/km)

High Temperature Aging (85 + 2 ºC)

≤ 0.05 (dB/km)

Water Immersion (23 + 2 ºC)

≤ 0.05 (dB/km)

Typical Dispersion Slope

0.087 (ps/(nm²·km))

Typical Fiber LMC Polarization Mode Dispersion (PMD)

< 0.02 (ps/√km)

Macrobend Attenuation

The maximum attenuation with bending does not exceed the specified values under the following deployment conditions:
Deployment Condition	Wavelength	Induced Attenuation
1 turn, 32 mm (1.2 inch) diameter	1550 nm	< 0.05 dB
100 turns, 50 mm (2 inch) diameter	1310 nm	< 0.05 dB
100 turns, 50 mm (2 inch) diameter	1550 nm	< 0.05 dB
100 turns, 60 mm (2.4 inch) diameter	1550 nm	< 0.05 dB
100 turns, 60 mm (2.4 inch) diameter	1625 nm	< 0.05 dB

Temperature & Humidity Cycling (At -10 to +85 to ~ 98% RH)

≤ 0.05 (dB/km)

Attenuation

Attenuation	Maximum	Typical
at 1310 nm	≤ 0.34 dB/km	≤ 0.33 dB/km
at 1385 nm	≤ 0.31 dB/km	≤ 0.27 dB/km
at 1490 nm	≤ 0.24 dB/km	≤ 0.21 dB/km
at 1550 nm	≤ 0.21 dB/km	≤ 0.19 dB/km
at 1625 nm	≤ 0.24 dB/km	≤ 0.20 dB/km

Attenuation vs. Wavelength

Range (nm)	Reference (nm) λ	α
1285 – 1330	1310	0.03
1360 – 1480	1385	0.04
1525 – 1575	1550	0.02
1460 – 1625	1550	0.04
The attenuation in a given wavelength range does not exceed the attentuation of the reference wavelength (λ) by more than the value α .

Coating Strip Force

Range: 1.0 N ≤ CSF ≤ 8.9 N

Standard Reel Lengths

50.4 km (31.3 miles)

PDF File
AllWave® Zero Water Peak (ZWP) Single-Mode Optical Fibers Data Sheet
Technical Report of 100 Gb/s Transmission over TrueWave® Fiber
Understanding Fiber Optics - Zero Water Peak Fiber
Manufacturing Zero Water Peak Single-Mode Fiber
Importance of Minimizing
/documents/pdf/Minimizing-PMD-in-Cabled-Fibers.pdf
/documents/pdf/Multimode-or-Single-Mode.pdf
/documents/pdf/OFS-Fiber-for-Data-Center-Applications.pdf